Asphaltene Inhibitors and Dispersants for Oilfield Production

GN Z-ASFA Series

Asphaltene inhibitors and dispersants reduce precipitation, agglomeration, and deposition of heavy organic components in the reservoir, wellbore, tubing, pipelines, and separators. Treatment supports stable flow and reduces plugging and cleaning frequency.

GN New Chem supplies asphaltene inhibitors and dispersants for customers who need dependable chemical performance under real operating conditions. Product selection is based on crude stability, pressure depletion, composition changes, aromaticity and compatibility. Standard and customized grades can be evaluated according to the customer’s process, target result and supply requirements.

Product Overview

Asphaltene Inhibitors and Dispersants are specialty chemical products formulated to delay precipitation, reduce agglomeration and keep asphaltene particles dispersed. They are intended to improve process stability and help the treatment or operating system achieve a more consistent result. Because feed properties and operating conditions can vary substantially, the recommended grade and dosage should be confirmed through laboratory screening and, when practical, a controlled field trial.

Main Functions

• Delay precipitation, reduce agglomeration and keep asphaltene particles dispersed.
• Support stable operation of downstream separation, treatment or production equipment.
• Reduce performance variation caused by changing feed composition or operating conditions.
• Help optimize total treatment cost by balancing product performance, dosage and process efficiency.

Features and Advantages

• Application-specific selection: grades are matched to the customer’s fluid chemistry, solids profile, temperature and process objective.
• Process compatibility: products can be screened with existing chemicals and equipment before full-scale use.
• Flexible formulation approach: options may be available for different concentration, active chemistry, handling and environmental requirements.
• Technical evaluation support: sample testing, comparative screening and dosage optimization can be arranged according to project needs.
• Reliable supply planning: packaging, labeling and export documents can be prepared for the destination market, subject to product and regulatory availability.

Typical Applications

Typical applications include wells, flowlines, separators, tanks and stimulation or solvent-treatment programs. The product may also be considered for related operations where the same separation, control or treatment mechanism is required. Final suitability depends on the actual system and should not be determined solely from the application name.

Recommended Use

• Review the feed or operating-fluid analysis, treatment objective and process limitations.
• Select candidate grades through a representative laboratory test or compatibility screening.
• Prepare and dose the product according to the product form, mixing requirement and safe-handling instructions.
• Introduce the chemical at a point that provides adequate dispersion, reaction or contact time without excessive shear.
• Start with the laboratory-derived dosage range, monitor key operating indicators and adjust gradually.
• Confirm sustained performance through a controlled field trial before establishing the routine treatment program.

Always follow the approved TDS, SDS, site chemical-management procedure and applicable local regulations. The optimum dosage is system-specific and should be based on performance data rather than a generic fixed rate.

Packaging, Storage and Transportation

Packaging may include bags, drums, intermediate bulk containers or other export-ready industrial packaging depending on whether the product is supplied as a powder, liquid, emulsion or dispersion. Store in the original sealed package in a dry, ventilated area, protected from incompatible materials, contamination, direct sunlight and extreme temperatures. Prevent freezing where applicable. Transportation classification, labeling and documentation will be confirmed according to the final formulation, destination country and shipment method.

Information Needed for Product Selection

• Application and process objective, including the current operating problem related to asphaltene inhibitors and dispersants.
• Representative sample and analysis; key selection factors include crude stability, pressure depletion, composition changes, aromaticity and compatibility.
• Current chemical program, supplier grade, dosage and observed performance.
• Process flow, chemical injection point, mixing/contact time and separation equipment.
• Operating temperature, pressure where relevant, pH, salinity and other compatibility constraints.
• Target product, water, solids, drilling-fluid or process specification and how performance will be measured.
• Daily or monthly consumption, preferred packaging, delivery location and required documentation.

Why GN New Chem

• Packaging: 25L Pail or 200L Drum for liquid.
• Store in the original sealed package in a dry, ventilated area, protected from incompatible materials, contamination, direct sunlight and extreme temperatures. Prevent freezing where applicable.
• Transportation classification, labeling and documentation will be confirmed according to the final formulation, destination country and shipment method.

Request a Product Recommendation

Send GN New Chem your application data and sample information for a preliminary review of suitable asphaltene inhibitors and dispersants. We can propose candidate product types, testing steps, required sample volume and commercial supply options for your project.